Klock Werks UTV Flare Windshield Kit-Can Am
Fits: 2017-2023 Can Am Maverick X3 and 2017-2023 Maverick X3 MAX
The innovative UTV Flare Windshield, design features “hips” at the outer edge of the shield that re-route air, and the “flip” at the top is designed to kick the air up and back as clean, less turbulent air for driver and passenger. This means you’ll have all the wind and debris protection you need without sacrificing your ability to see! Unlike flat shields that don’t work if they are too low, or lost visibility if it’s too high, you’ll still be able to look over the Flare, even after it’s caked in mud.
This sleek windshield is made from hard-coated polycarbonate. The kit comes with patented AXIA Alloys detach clamp hardware, roll cage J-clamps, and thumbscrew turn knobs, machined from billet-aluminum, then black anodized.
Installation is a snap, and all necessary hardware is included.
- Made from Dual Side Hard coated polycarbonate
- Includes ALL mounting hardware - detachable
- High-quality rubber edge trim
- Windscreen sits at same angle as front cage down tubes
- Made to mount to OEM roll cage, but fits many aftermarket cages (with similar to stock dimensions)
- Height from hood at flip (in front of driver/passenger): 13"
- Height from hood at center: 10.6"
- Width: 49.25"
- Thickness: 0.160
Modification may be required for aftermarket roll cages and cages with intrusion bars.
-
Fitment
Fitment
-
Warranty
Warranty
Warranty Policy
For warranty related questions or issues, please contact Klock Werks directly via email (info@getklocked.com) or by phone (605-996-3700).
Klock Werks warrants that its products will be free of defects in materials and workmanship for a period of one (1) year from the date of purchase. If any product should become defective within the warranty period, Klock Werks, at its option, will replace, repair or refund the purchase price. Repair or replacement parts or products will be furnished on an exchange basis and will either be new or reconditioned. All replaced products shall become the property of Klock Werks.
Warranty service is available to the original purchaser during the warranty period by contacting the authorized retailer where the original purchase was made. Proof of purchase will be required. The buyer (you) will bear all shipping, packaging, insurance and all other costs related to returning the product. This limited warranty does not extend to any product which has been damaged as a result of accident, improper care, misuse, abuse or as a result of unauthorized service.
In no event shall Klock Werks be liable for incidental or consequential damages to any electronic device or personal property attached to or used in conjunction with a Klock Werks product, including without limitation, loss of property arising from the breach of any expressed or implied warranties.
All returns will be subject to a 20% restocking fee. You may return most new, unopened items for a full refund within 30 days of delivery. These items should be in their original packaging and have their serial number or UPC. If you would like to make a return or exchange, you must contact us by phone or email and request an RMA (Return Merchandise Authorization) number before returning your items. This RMA number should be easily visible on the outside of the returned package.
Remember, if you would like to return or exchange your item, you must contact us before sending it back. Items returned to us without notification will not be eligible for a refund or exchange.
-
Installation
Installation
UTV FLARE® WINDSHIELD FOR CAN-AM X3
INCLUDED COMPONENTS:
INSTALLATION
1. Install the provided rubber trim onto the bottom edge of your Flare® Windshield
2. Following the provided diagram, install the clamps around the A-pillars and then through the windshield (1)
3. Secure the windshield clamps with the thumb screws (2, 3) 4. Enjoy your new Flare® Windshield!
KLOCK WERKS // WWW.GETKLOCKED.COMGETKLOCKED.COM
​
-
Reviews
Reviews
UTV FLARE® WINDSHIELD FOR CAN-AM X3
INCLUDED COMPONENTS:
INSTALLATION
1. Install the provided rubber trim onto the bottom edge of your Flare® Windshield
2. Following the provided diagram, install the clamps around the A-pillars and then through the windshield (1)
3. Secure the windshield clamps with the thumb screws (2, 3) 4. Enjoy your new Flare® Windshield!
KLOCK WERKS // WWW.GETKLOCKED.COMGETKLOCKED.COM
​
Warranty Policy
For warranty related questions or issues, please contact Klock Werks directly via email (info@getklocked.com) or by phone (605-996-3700).
Klock Werks warrants that its products will be free of defects in materials and workmanship for a period of one (1) year from the date of purchase. If any product should become defective within the warranty period, Klock Werks, at its option, will replace, repair or refund the purchase price. Repair or replacement parts or products will be furnished on an exchange basis and will either be new or reconditioned. All replaced products shall become the property of Klock Werks.
Warranty service is available to the original purchaser during the warranty period by contacting the authorized retailer where the original purchase was made. Proof of purchase will be required. The buyer (you) will bear all shipping, packaging, insurance and all other costs related to returning the product. This limited warranty does not extend to any product which has been damaged as a result of accident, improper care, misuse, abuse or as a result of unauthorized service.
In no event shall Klock Werks be liable for incidental or consequential damages to any electronic device or personal property attached to or used in conjunction with a Klock Werks product, including without limitation, loss of property arising from the breach of any expressed or implied warranties.
All returns will be subject to a 20% restocking fee. You may return most new, unopened items for a full refund within 30 days of delivery. These items should be in their original packaging and have their serial number or UPC. If you would like to make a return or exchange, you must contact us by phone or email and request an RMA (Return Merchandise Authorization) number before returning your items. This RMA number should be easily visible on the outside of the returned package.
Remember, if you would like to return or exchange your item, you must contact us before sending it back. Items returned to us without notification will not be eligible for a refund or exchange.
Our Guarantee
-
Best price Guaranteed
Best Price Guaranteed
-
Live Chat Support
Live Chat Support- Receive quick answers to your questions during business hours.
-
Fastest Shipping
Fastest Shipping- Orders ship within 24 hours. Exclusions Apply.
-
30 day return Guarantee
30 Day Guarantee- Refunds within 30 days of the original order date. Exclusions Apply.
Spec Sheet
- BrandKlock Werks
- SKU23170404
